Shifts And Grins Fabrication 30" Light Bar Brackets

Shifts And Grins

Active member
Joined
Nov 27, 2021
Messages
277
Reaction score
210
Location
Gilbert, Arizona
We have sold these light bar brackets for the 5th gen Ram 1500 for quite some time but never offered them for the TRX because we hadn't done an install on a TRX until today. We installed a Diode Dynamics 30" light bar on out 2022 Ram TRX today using our brackets. It required some minor trimming, one plastic piece had to be trimmed. We are super happy with the results. It took us 3 hours and 20 minutes. That included at least one 15 minute phone call, filming, figuring out he process etc. Below is the results.

IMG_2169.jpg
IMG_2166.jpg
IMG_2168.jpg
 

quietpeen

Well-known member
Joined
Nov 14, 2021
Messages
1,954
Reaction score
1,433
Location
United States
Can you modify the bracket to work on regular rams and the trx so that neither applications require trimming? That will get you more potential buyers.
 
OP
OP
Shifts And Grins

Shifts And Grins

Active member
Joined
Nov 27, 2021
Messages
277
Reaction score
210
Location
Gilbert, Arizona
Can you modify the bracket to work on regular rams and the trx so that neither applications require trimming? That will get you more potential buyers.
There is no room for a light bar in there on a TRX without trimming. There is a piece of plastic in the center of that opening that has to be trimmed for a light bar to fit. It isn’t the brackets that cause there to be trimming it’s the light bar. I hope that makes sense.
 

Latest posts

Forum statistics

Threads
572
Messages
9,754
Members
708
Latest member
FP3
Top